Company News
Location:Home > News > Company News
Method for adjusting the pressure of a roll die cutter
Date:2019-09-10
When using the roll die-cutting machine, it is necessary to control the position of the operation panel, so that the pressure adjustment and the skew adjustment of the die-cutting plate are safer and easier to operate, and can be adjusted at any time in the case of starting up.
The die cutting pressure adjustment of the general reel die-cutting machine adopts the upper adjustment mode and the lower adjustment mode, that is, adjustment above the paper feed or adjustment under the paper feed, and most of the roll die-cutting machines are used. Adjustment, because from a technical point of view, if the two-seat die-cutting is used, it is difficult to make the paper at a level. Similarly, for the adjustment of the skew of the dieboard, it is also possible to use the upper adjustment method, which has the same reason. Manufacturers must consider this aspect when selecting machines, especially for dual-mode cutting.